User's Manual

IU 688 / 0402 6 TowerFeed

for the HP color LaserJet 4650

INSTALLATION

Warning:

TowerFeed may weigh up to 60 kilograms (130 pounds) depending on configuration. To prevent back

strain or injury, enlist the help of someone and bend your knees when lifting the unit.

Warning:

POWER OFF your printer and TowerFeed and disconnect all power and interface cables before you

proceed with the installation.

Hardware Installation

Remove Transportation Inserts

• Pull out, lift upwards and remove the trays from TowerFeed

so as to remove the transportation inserts (Fig. 7). There are

two at each side (keep the inserts for reshipment).

Note: The top tray is a turn round tray and does therefore

not store any paper

• Re-insert and close the trays.

Note:

Located on the right side of each tray you will find coding pins for the paper size. They are set by the

factory and must not be changed.

Fig. 7 Removing Transportation Inserts