- Hewlett-Packard Color LaserJet User Guide

EN Chapter 3 95
Job retention features
To use the Job retention features listed below, you must install a hard
disk in the printer and properly configure the printer drivers. All Job
retention features are selected in the printer driver. Some Job
retention features require you to use the printer control panel menus
to release the print job.
CAUTION Make sure to identify your jobs in the printer driver before printing. Using
default names may override previous jobs with the same default name
or cause the job to be deleted.
Note Adding additional printer memory may resolve memory problems,
improve how the printer handles complex graphics, and improve
download times, but will not increase maximum printer speed (ppm
rating).
Quick copying a job
The quick copy feature prints the requested number of copies of a job
and stores a copy on the printer’s hard disk. Additional copies of the
job can be printed later. This feature can be turned off from the driver.
For more information about specifying the number of quick copy jobs
that can be stored, see the
QUICK COPY JOBS control panel item
described on page 47
.
Printing additional copies of a quick copy job
To print additional copies of a job stored on the printer’s hard disk
from the control panel:
1 Press M
ENU repeatedly until QUICK COPY JOBS MENU appears.
2 Press I
TEM until the desired user or job name appears.
Note If you are using a Macintosh computer, the user name appears on the
first line of the display and the job name appears on the second line of
the display. After you have selected the desired user name using I
TEM,
press VALUE until the desired job name appears.
3 Press S
ELECT to select the job. COPIES=1 appears.
4 Press - V
ALUE + until the desired number of copies appears.
5 Press S
ELECT to print the job.