Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
16-11
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 16 Configuring and Managing Zones
Configuring Zones
Figure 16-10 Edit Local Full Zone Database Dialog Box
Step 3
Select the members you want to add from the Fabric pane and click Add to Zone or click the zone where
you want to add members and click the Insert icon.
You see the Add Member to Zone dialog box as shown in Figure 16-11.
Figure 16-11 Add Member to Zone Dialog Box
Note The Device Alias radio button is visible only if device alias is in enhanced mode. For more
information, see the “Configuring Device Alias Modes” section on page 17-4.
Step 4 Click the browse button and choose a port name or check the LUN check box and click the browse button
to configure LUNs.