Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-113
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FICON-6
Error Message FICON-6-PDCM_CHANGE: VSAN [dec] port-address [dec] prohibit mask set
to [chars].
Explanation
The FICON prohibit dynamic connectivity mask (PDCM) for this port has changed.
The VSAN port address PDCM is now set to the value shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(3).
Error Message FICON-6-PORT_SWAP: port number [dec] [dec] swapped.
Explanation
FICON port numbers swapped.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message FICON-6-VSAN_DISABLED: FICON disabled on VSAN [dec].
Explanation
FICON has been disabled on the VSAN shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message FICON-6-VSAN_ENABLED: FICON enabled on VSAN [dec].
Explanation FICON has been enabled on the VSAN shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
FLOGI Messages
This section contains the fabric login (FLOGI) messages.
FLOGI-5
Error Message FLOGI-5-MSG_IF_REINIT_ALPA_CONFLICT: [VSAN [dec], Interface [chars]]
FL/TL interface [chars] re-initialized as ALPA - PWWN map conflict occurred.
Explanation
The FL or TL interface reinitialized as an arbitrated loop physical address (ALPA) and
now conflicts with an existing fabric login (FLOGI) session after the Loop Initialization Protocol
(LIP). All devices will log in again with new ALPA and pWWN mapping.
Recommended Action No action is required.