Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(2c) (OL14116-03, November 2007)

Send documentation comments to [e-mail]
34
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(2c)
OL-14116-03
Caveats
• CSCsk73370
Symptom: In SAN-OS Release 3.2(1), the user configuration is not restored after a reload.
Workaround: This issue is resolved.
• CSCsk88049
Symptom: When using NASB with the EMC Clariion Disk Library (CDL), after enabling or
disabling NASB (that is in the same VSAN as the CDL) multiple times, a login to the CDL from the
NASB initiator can fail.
Workaround: This issue is resolved.
• CSCsk88959
Symptom: While an interface is shutdown, a zone might fail. The failure can occur when the
shutdown and no shutdown commands are entered several times on the interface if the members of
the zone are interface, fWWN, domain port, domain interface, device alias, symbolic node name,
and IP address, and the members are present in an active zone set.
Workaround: This issue is resolved.
• CSCsk88967
Symptom: When installing Fabric Manager, servers using the password authentication method only
fail the verification test. This occurs when you click Verify Remote Server during installation to
test for connectivity. Fabric Manager supported only the keyboard interactive authentication method
for SSH. Fabric Manager now supports password authentication also.
Workaround: This issue is resolved.
• CSCsk89586
Symptom: On the MDS 12-port, 24-port, and 48-port 4-Gbps Fibre Channel switching modules,
and on the 4-port 10-Gbps Fibre Channel switching module, in SAN-OS Release 3.2(1) and older
releases, if NPIV is enabled and the switch has been reloaded, the installer will not prevent an
upgrade to Release 3.2(2c). After the upgrade, zoning may not work properly for the F-ports
connected to NPIV capable hosts.
Workaround: This issue is resolved.
• CSCsk90564
Symptom: In large fabrics, an IVR activation or deactivation fails due to a Cisco Fabric Service
(CFS)-Messaging and Transaction Service (MTS) reject.
Workaround: This issue is resolved.
• CSCsk93682
Symptom: If you upgrade to Cisco SAN-OS Release 3.2(2c) from a lower version, or downgrade
from Cisco SAN-OS Release 3.2(2c) to a lower version on an MDS 9124 switch, MDS 9134 switch,
Cisco Fabric Switch for HP c-Class BladeSystem, or a Cisco Fabric Switch for IBM BladeCenter,
zoning may not work as configured for the F ports connected to NPIV-capable hosts.
Workaround: This issue is resolved.
• CSCsk94090
Symptom: When installing a Fabric Manager license, the Product Authorization Key (PAK)
installation fails. This occurs when the VDH= string is no longer needed as part of the Cisco license
server URL.
Workaround: This issue is resolved.