Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1) (OL-25090-01, July 2011)

Send documentation comments to [e-mail]
9
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1)
OL-25090-01
MDS 9000 Chassis and Module Support
Table 5 lists the MDS hardware modules supported by Cisco MDS SAN-OS 3.x.
1. Requires DS-13SLT-FAB3 or DS-13SLT-FAB2 in the MDS 9513.
2. Requires the Supervisor-2A module.
3. Requires DS-13SLT-FAB2 in the MDS 9513.
Table 4 Module Support Matrix for Cisco MDS NX-OS 4.x
Module Description MDS 9500 Series MDS 9222i MDS 9216i
DS-X9530-SF2-K9 MDS 9500 Supervisor-2 Module Yes N/A N/A
DS-X9530-SF2A-K9 MDS 9500 Supervisor-2A Module Yes
1
N/A N/A
DS-X9530-SF1-K9 MDS 9500 Supervisor-1 Module No N/A N/A
DS-13SLT-FAB2 MDS 9513 Fabric Module 2 Yes N/A N/A
DS-13SLT-FAB1 MDS 9513 Fabric Module 1 Yes N/A N/A
DS-X9224-96K9 24-port 8-Gbps Fibre Channel Switching Module Yes
2
No No
DS-X9248-96K9 48-port 8-Gbps Fibre Channel Switching Module Yes
2
No No
DS-X9248-48K9 4/44-port Host Optimized8-Gbps Fibre Channel
Switching Module
Yes Yes No
DS-X9316-SSNK9 16-port Storage Services Node (SSN-16) Yes Yes Yes
DS-X9304-18K9 18/4-Port Multiservice Module (MSM-18/4) Yes Yes Yes
DS-X9112 12-port 4-Gbps Fibre Channel Switching Module Yes Yes Yes
DS-X9124 24-port 4-Gbps Fibre Channel Switching Module Yes Yes Yes
DS-X9148 48-port 4-Gbps Fibre Channel Switching Module Yes Yes Yes
DS-X9704 4-port 10-Gbps Fibre Channel Switching Module Yes Yes Yes
DS-X9302-14K9 14/2-port Multiprotocol Services (MPS-14/2)
Module
Yes No Yes
DS-X9016 16-port 1-, 2-Gbps Fibre Channel Switching
Module
Yes No Yes
DS-X9032 32-port 1-, 2-Gbps Fibre Channel Switching
Module
Yes No Yes
DS-X9032-SSM 32-port Storage Services Module (SSM) Yes Yes Yes
DS-X9308-SMIP 8-port 1-, 2-Gbps IP Switching Module No No No
DS-X9304-SMIP 4-port 1-, 2-Gbps IP Switching Module No No No
1. In software releases earlier than Cisco NX-OS Release 4.2(7a), the Supervisor-2A module appears as unsupported hardware in Device Manager, but the
Supervisor-2A module does work with Cisco NX-OS release 4.x software.
2. Requires DS-13SLT-FAB2 in the MDS 9513.