Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
25-8
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 25 Configuring Fabric Binding
Configuring Fabric Binding
Copying Fabric Binding to the Configuration File
To copy the active fabric binding to the configuration file using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Actions tab in the Information pane (see Figure 25-3).
Step 3 Check the CopyActive ToConfig check box for the VSAN(s) for which you want to copy fabric binding.
Step 4 Click the Apply Changes icon to copy the fabric binding.
Caution You cannot deactivate or disable fabric binding in a FICON-enabled VSAN.
Viewing EFMD Statistics
To view EFMD statistics using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the EFMD Statistics tab.
You see the statistics information.
Viewing Fabric Binding Violations
To view fabric binding violations using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Violations tab.
You see the violations information.
Viewing Fabric Binding Active Database
To view the fabric binding active database using Fabric Manager, perform this task:
Step 1 Expand a VSAN with fabric binding in the Logical Domains pane. Expand Fabric Binding.
Step 2 Click the Active Database tab.
You see the active database information as shown in Figure 25-5.