Cisco Nexus 5000 Series Switch Fabric Manager Software Configuration Guide, NX-OS 4.0 (OL-16598-01, June 2008)

Send comments to [e-mail]
15-12
Nexus 5000 Series Switch Fabric Manager Software Configuration Guide
OL-16598-01
Chapter 15 Configuring and Managing VSANs
Default Settings
Step 3 Click Apply Changes to save these changes, or click Undo Changes to discard any unsaved changes.
About Interop Mode
Interoperability enables the products of multiple vendors to connect with each other. Fibre Channel
standards guide vendors to create common external Fibre Channel interfaces. For additional information,
see the “Switch Interoperability” section on page 22-7.
Default Settings
Table 15-2 lists the default settings for all configured VSANs.
Table 15-2 Default VSAN Parameters
Parameters Default
Default VSAN VSAN 1.
State Active state.
Name Concatenation of VSAN and a four-digit string representing the
VSAN ID. For example, VSAN 3 is VSAN0003.
Load-balancing attribute OX ID (src-dst-ox-id).