Cisco Nexus 5000 Series Hardware Installation Guide (OL-15902-01, November 2008)

CHAPTER
Send documentation comments to [e-mail]
2-1
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
2
Installing the Cisco Nexus 5000 Switch
This chapter describes how to install the Cisco Nexus 5000 switch, and it includes the following
information:
• Preparing for Installation, page 2-2
• Installing the Cisco Nexus 5020 Chassis in a Cabinet or Rack, page 2-5
• Grounding the System, page 2-10
• Grounding the Chassis, page 2-15
• Starting the Switch, page 2-17
• Removing and Installing Components, page 2-18
• Repacking the Cisco Nexus 5000 Switch for Return Shipment, page 2-26
Note Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Information for the Cisco Nexus 5000 Family for important safety information.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Warning Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Statement 1030