Cisco Nexus 5000 Series Hardware Installation Guide (OL-15902-01, November 2008)

Send documentation comments to [e-mail]
1-29
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 1 Product Overview
Nexus 5010 Switch
SFP+ Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a
bidirectional device with a transmitter and receiver in the same physical package. It has a 20-pin
connector on the electrical interface and duplex LC connector on the optical interface.The Cisco Nexus
5010 switch supports the following SFP+ optical transceivers:
• SR
• DCR, SR-Lite (shorter reach than SR)
• LRM (for uplink only)
• LR (for uplink only)
SFP+ Copper Cables
Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. The cables come in the
following lengths:
• 1m, 30AWG
• 3m, 28-30 AWG
• 5m, 26-28 AWG
• 7m, 24-26 AWG
SFP Fiber Channel Transceivers
The Cisco Nexus 5010 switch supports the multimode 850nm 4Gbps SFP with 150m reach.
Model Description
SFP-10G-SR 10-Gigabit Ethernet—short range SFP+ module
SFP-10G-LR 10-Gigabit Ethernet—long range SFP+ module
Model Description
SFP-H10GB-CU1M 10GBASE-CU SFP+ Cable 1 Meter
SFP-H10GB-CU3M 10GBASE-CU SFP+ Cable 3 Meter
SFP-H10GB-CU5M 10GBASE-CU SFP+ Cable 5 Meter
SFP-H10GB-CU7M 10GBASE-CU SFP+ Cable 7 Meter
Model Description
DS-SFP-FC4G-SW 4 Gbps Fibre Channel-SW SFP, LC
DS-SFP-FC4G-LW 4 Gbps Fibre Channel-LW SFP, LC, (10km
Reach)