Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2(1) (OL-16599-01, March 2009)

Send comments to [e-mail]
1-121
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 1 Basic System Commands
terminal width
terminal width
To set the number of character columns on the terminal screen for the current line for a session, use the
terminal width command. To revert to the default, use the no form of this command.
terminal width columns
terminal no width
Syntax Description
Command Default For a virtual terminal, the width is set during negotiation with the client software. Otherwise, 80 columns
is the default.
Command Modes EXEC mode
Command History
Usage Guidelines The terminal width setting applies only to the current session.
Examples This example shows how to set the number of columns to display on the terminal:
switch# terminal width 70
This example shows how to revert to the default number of columns:
switch# terminal no width
Related Commands
columns Number of columns. The range is from 24 to 511.
Release Modification
4.0(0)N1(1a) This command was introduced.
Command Description
show terminal Displays the terminal session configuration.