Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-28
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
setup
setup
To run the basic setup facility, use the setup command.
setup ficon | sme
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Usage Guidelines Use the setup sme command to create the sme-admin and sme-recovery roles for Cisco SME.
Examples The following example creates the sme-admin and sme-recovery roles:
switch(config)# setup sme
Set up four roles necessary for SME, sme-admin, sme-stg-admin, sme-kmc-admin and
sme-recovery? (yes/no) [no] yes
If CFS is enabled, please commit the roles so that they can be available.
SME setup done.
Related Commands
ficon Runs the basic FICON setup command facility.
sme Runs the basic Cisco SME setup command facility.
Release Modification
3.3(1c) This command was introduced.
Command Description
show role Displays information about the various Cisco SME role configurations.