Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-3
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
clear fc-redirect config
clear fc-redirect config
To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command.
clear fc-redirect {config vt vt-pwwn local-switch-only}
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command deletes configurations (including active configurations) on the FC-Redirect created by
applications such as Cisco SME and DMM. This command enables the host server to talk to the storage
array, which directly bypasses the individual Intelligent Service Applications (ISAs), and causes data
corruption.
You must use this command only as the last option to clear any left-over configurations which cannot be
deleted from the application (Cisco SME and DMM).
Use this command while decommissioning the switch.
Examples The following example clears the FC-Redirect configuration on the switch:
switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64
Deleting a configuration MAY result in DATA CORRUPTION.
Do you want to continue? (y/n) [n] y
Related Commands
vt vt-pwwn Specifies the virtual target (VT) of the configuration to be deleted. The
format is hh:hh:hh:hh:hh:hh:hh:hh.
local-switch-only Deletes the configuration only on the local switch.
Release Modification
3.2(2c) This command was introduced.
Command Description
show fc-redirect active configs
Displays all active configurations on the switch.