HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure 3
4 Virtual targets defined for host
2. Select a target and click Log On….
The Log On to Target window opens (Figure 35).
Figure 35 Log On to Target window
3. Select the Automatically restore th is con nection when the system boots and the Enable m ulti-pat h
check boxes to ensure that the controller port i s enabled as a persistent target and is able
to utilize multi-pathing (Figure 35).
4. Click OK.
5. Repeat Steps 2 through 4 for a ll available virtual targets.
The Targets tab should now display the status for both storage controllers as Connected (Figure 34).
C-Series iSCSI 39