HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure31iSCSIInitiatorzonedwithanEVAstorageport
Virtual targ
eting
Before the i
SCSI Initiator ca n log in to the storage controller, you must create virtual targets on each
C-Series Fibre Channel switch in the iSCSI window.
1. Using the Cisco D evice M anager, select IP > iSCSI from the Device Manager menu bar.
The IP iSCSI
window opens (Figure 28).
2. Click th e Targets tab (Figure 32).
Figure 32 The Targets ta b
3. Click
Create.
The Create iSCSI Ta rgets window opens (Figure 33).
4. In the Create iSCSI Targets window, enter a name for the iSCSI Nam e box.
5. Select the target storage port from the Port WW N list.
6. Und er Initiator Access, select an Initiator. Select All if the list is empty.
7. Under Advertised Interfaces, select the port connected to the host iSCSI Initiator.
C-Series iSCSI 37