User's Manual

138

Changing Your Workstation’s Hardware Conﬁguration

Installing an EISA, PCI, or GSC Option Board

Graphics Paths

graphics(0) is the built-in 8-plane graphics adapter (C160/C180 only).

graphics(1) through graphics(4) are graphics adapters installed in option

slots 1 through 4.

When a dual display graphics adapter (an adapter which has two video out-

put connectors) is installed, the video connector on the left (when looking at

the system from the rear) is graphics(NA) and the video connector on the

right is graphics(NB), where N is the slot number in which the graphics

adapter is installed. A and B denote the two video output connectors on the

dual display adapter.

For example, a Dual Visualize Enhanced Graphics Card (A4451A) installed

in option slot 3 would be graphics(3A) and graphics(3B).