- Hewlett-Packard InkJet Printer User's Guide

ENWW Understanding control-panel menus 53
Configure Device menu
Items in this menu affect printer behavior. Configure the printer according to your
printing needs.
Resetting the printer
You may need to reset the printer in the following circumstances:
z You want to restore the printer’s default settings.
z Communication between the printer and computer has been interrupted.
CAUTION When you use the restore factory settings option on this menu, you can lose printer
configuration settings.
Note This option does not reset an HP Jetdirect print server to its default settings if one is installed
in the printer. To reset the HP Jetdirect print server, see Resetting the HP Jetdirect print server.
Message Value or Submenu Description
PRINT PS/PCL6 ERRORS OFF
ON
This item allows you to print a list of
PS/PCL6 errors.
Default = OFF
UNATTENDED PRINTING OFF
ON
This item sets the printer to pause
during large print jobs (after every
100 pages) so that you can clear the
output tray.
Default = OFF
SYSTEM SETUP PERSONALITY This item sets the default personality
to automatic switching, PCL5, PCL6,
or PostScript emulation.
Default = AUTO
LANGUAGE This item sets the default language.
Select it from the list of supported
languages.
Default = ENGLISH
I/O I/O TIMEOUT This item sets the length of time
(from 5 to 300 seconds) that the
printer waits for remaining data for a
print job. If that time is exceeded,
the printer prints the print job.
Default = 15
EIO This item allows you to access
submenus for the HP Jetdirect print
server, if one is installed. For details,
see Changing networking parameters
from the control panel.
RESTORE FACTORY
SETTINGS
YES
NO
This item restores all values to the
printer’s predetermined factory values.