- Hewlett-Packard InkJet Printer User's Guide

24 3 - Using the printer ENWW
4 Insert the media print-side down along the right of the tray. Make sure the stack of media
aligns with the right and back edges of the tray, and does not spill over the edges.
5 Press the buttons of the media guides and slide the guides to the edges of the
loaded media.
Tray 1
6 If you removed tray 1, gently reinsert it into the printer and lower the output tray to its
original position.
If you removed tray 2, lower the tray cover and gently reinsert tray 2.
CAUTION If you have extended the tray, do not press the tray extension lock when inserting the tray.
Pressing it will cause the tray to be retracted when you push in the tray. The longer media in
the tray will be folded; this will cause problem during printing.
7 If you have extended tray 1 or tray 2, extend the output tray by grasping under the front of
the output tray and pulling out the media extension.
8 When printing, select the appropriate media type and size from the printer driver.
See Changing print settings.