HP StorageWorks Fabric OS 6.1.x administrator guide (5697-0234, November 2009)

36 Standard features
3. Verify that the license was added by entering the licenseShow command. The licensed features
currently installed on the switch display. If the feature is not listed, enter the licenseAdd command
again.
Some features may require additional configuration, or you may need to disable and reenable the
switch to make them operational; see the feature documentation for details.
switch:admin> licenseshow
RzdeSee9wVlfTu:
Web license
Zoning license
SES license
Fabric license
Remote Switch license
Extended Fabric license
Fabric Watch license
Performance Monitor license
Trunking license
Security license
4 Domain Fabric license
FICON_CUP license
N_Port ID Virtualization license
High-Performance Extension over FCIP/FC license
Ports on Demand license - additional 16 port upgrade
2 Domain Fabric license
Ports on Demand license - additional 16 port upgrade
Removing a licensed feature
1. Connect to the switch and log in using an admin account.
2. Enter the licenseShow command to display the active licenses.
3. Remove the license key using the licenseRemove command.
switch:admin> licenseremove "key"
The license key is case-sensitive and must be entered exactly as given. The quotation marks
are optional. After removing a license key, the optionally licensed feature is disabled when the switch is
rebooted or when a switch disable and enable is performed.
4. Enter the licenseShow command to verify that the license is disabled.
switch:admin> licenseshow
bQebzbRdScRfc0iK:
Web license
Zoning license
switch:admin> licenseremove "bQebzbRdScRfc0iK"
removing license key "bQebzbRdScRfc0iK"
switch:admin>
After a reboot (or switchDisable and switchEnable), only the remaining licenses appear:
switch:admin> licenseshow
SybbzQQ9edTzcc0X:
Fabric license
switch:admin>
If there are no license keys, licenseShow displays “No licenses.”