HP StorageWorks Fabric OS 5.0.0 Fabric Watch User Guide (AA-RW1TA-TE, May 2005)
Table Of Contents
- Contents
- About this guide
- An introduction to Fabric Watch
- Fabric Watch concepts
- Fabric watch components
- Configuring events
- Port persistence
- Notification methods
- Switch policies
- Interpreting event messages
- Activating and accessing Fabric Watch
- Configuring Fabric Watch
- Configuring Fabric Watch thresholds
- Configuring notifications
- Configuring switch status policy
- Configuring FRUs
- Configuring Fabric Watch using Web Tools
- Configuring Fabric Watch using SNMP
- Generating Fabric Watch reports
- Default threshold values
- Basic Fabric Watch configuration guidelines
- Using Fabric Watch with configuration files
- Glossary
- Index
27Fabric OS 5.0.0 Fabric Watch user guide
Resource class area
Table 9 describes the Fabric Watch resource class area.
Receive (RX) Performance The percentage of maximum bandwidth consumed in packet
receipts.
State Changes The state of the port has changed for one of the following reasons:
• The port has gone offline.
• The port has come online.
• The port is testing.
• The port is faulty.
• The port has become an E_Port.
• The port has become an F/FL_Port.
• The port has segmented.
• The port has become a trunk port.
Transmit (TX) Performance The percentage of maximum bandwidth consumed in packet
transmissions.
Table 8 Port class areas (continued)
Area Indicates
Table 9 Resource class area
Area Description
Flash Monitor Monitors the compact flash space available by calculating the
percentage of flash space consumed and comparing it with the
configured high threshold value.