DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 279
53-1001775-01
Removing a host server
10
5. Select a fabric from the Targeted Fabric list.
6. Select a severity (None, Critical, Error, Warning, Info, or Debug) from the Severity list.
7. Clic k OK on the SNMP Setup dialog box.
Removing a host server
You can remove any host server as the trap recipient on managed Fabric OS devices.
To remove a host server, complete the following steps.
1. Select Monitor > SNMP Setup.
The SNMP Setup dialog box displays.
2. Click the Other Recipients tab.
3. Select Remove from the Action list.
4. Click OK on the SNMP Setup dialog box.
Enabling trap forwarding
You can enable trap forwarding on all defined destinations.
To enable trap forwarding, complete the following steps.
1. Select Monitor > SNMP Setup.
The SNMP Setup dialog box displays.
2. Click the Trap Forwarding tab.
3. Select the Enable trap forwarding check box.
4. Click OK on the SNMP Setup dialog box.
Adding an SNMPv1 destination
You can only configure six destinations, including v1 and v3 destinations.
To add a V1 destination, complete the following steps.
1. Select Monitor > SNMP Setup.
The SNMP Setup dialog box displays.
2. Click the Trap Forwarding tab.
3. Select V1 from the Trap forwarding type list.