DCFM Enterprise User Manual (53-1001775-01, June 2010)

DCFM Enterprise User Manual 209

53-1001775-01

Refreshing the port connectivity view

To obtain configuration changes that occurred since the Port Connectivity View dialog box opened,

click Refresh.

Enabling a port

To enable a port from the port connectivity view, right-click the port you want to enable from the

Port Connectivity View dialog box and select Disable/Enable Port > Enable.

Disabling a port

To disable a port from the port connectivity view, right-click the port you want to disable from the

Port Connectivity View dialog box and select Disable/Enable Port > Disable.

Switch Routing Policy Whether a routing policy, for example, port-based routing policy,

is enabled.

Switch Secure Mode Whether switch secure mode is enabled.

Switch Status The operational status. There are four possible operation

status values:

• Up - Operation is normal.

• Down - The port is down or the route to the remote

destination is disabled.

• Disabled - The connection has been manually disabled.

• Backup Active - The backup TCP port is active due to a

failover.

Switch Supplier Serial Number The serial number of the switch supplier.

Switch Version The switch’s version number.

Tag The tag number of the port.

Unit Type The switch unit type.

User Port Number The port number of the user’s device.

Vendor The hardware vendor’s name.

TABLE 12 Port connectivity properties (Continued)

Field Description