Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

604 Fabric OS Command Reference
53-1001186-01
portLogDump
2
portLogDump
Displays the port log without page breaks.
Synopsis portlogdump [count[, saved[, portid]]]
Description Use this command to display the port log, listing all entries in the log without page breaks. This
command displays the same information as portLogShow, but portLogShow prompts you to press
Enter between each page.
If the port log is disabled, the following message displays as the first line:
WARNING: port log is disabled
Refer to the portLogClear command for more information. For a full explanation of the information
displayed by this command, refer to the Fabric OS Administrator’s Guide.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
count Specify the maximum number of lines to be displayed. Only the most recent
count entries are displayed. This operand is optional.
saved Specify a nonzero value to display the saved port log from the last switch
fault. Refer to upTime for conditions that cause a fault. The operand count is
ignored when displaying the saved log. This operand is optional.
portid Specify the port for which to display the log dump. If a port is not specified,
the command displays the port logs for all ports. This operand is optional.
Examples To display the port log for a port:
switch:user> portlogdump 20
time task event port cmd args
------------------------------------------------------
08:35:27.899 tShell pstate 14 OL1
08:35:27.899 tReceive pstate 14 LR2
08:35:27.916 tReceive pstate 14 AC
08:35:28.416 interrupt scn 14 1
08:35:28.433 tFabric ioctl 14 90 101d9910,0
08:35:28.433 tFabric Tx 14 164 02fffffd,00fffffd,0005ffff,10000000
08:35:28.433 tReceive Rx 14 0 c0fffffd,00fffffd,00050006
08:35:28.433 tReceive Rx 14 164 03fffffd,00fffffd,00050006,02000000
08:35:28.433 tTransmit Tx 14 0 c0fffffd,00fffffd,00050006
08:35:28.433 tFabric ioctl 14 91 103646d8,0
08:35:28.466 tFabric ioctl 14 a7 3c,1
08:35:28.466 tFabric pstate 14 LR1
08:35:28.466 tReceive pstate 14 LR3
08:35:28.466 tReceive pstate 14 AC
08:35:28.483 tFabric Tx 14 96 02fffffd,00fffffd,0006ffff,11100060
[output truncated]
See Also portLogClear, portLogShow, upTime