Brocade Error Message Reference Guide v6.0.0 (53-1000600-01, April 2008)

Fabric OS Message Reference 217
53-1000600-01
FW-1325
29
FW-1325
Message <timestamp>, [FW-1325], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of serial violations has fallen below the low boundary. Serial violations
indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains
a list of switch world-wide names (WWNs) for which serial port access is enabled.
Recommended
Action
No action is required.
Severity INFO
FW-1326
Message <timestamp>, [FW-1326], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of serial violations has risen above the high boundary. Serial violations
indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains
a list of switch world-wide names (WWNs) for which serial port access is enabled.
Recommended
Action
Run the errShow command to determine the WWN of the device that sent the request. Responses
to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity WARNING
FW-1327
Message <timestamp>, [FW-1327], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of serial violations has changed from a value outside of the acceptable
range to a value within the acceptable range. Serial violations indicate that an unauthorized serial
port request has been received. The SERIAL_POLICY contains a list of switch world-wide names
(WWNs) for which serial port access is enabled.
Recommended
Action
No action is required.
Severity INFO