HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

768 Licensed product commands
QuickLoop Fabric Assist mode commands
The commands listed in Table 21 are for QuickLoop Fabric Assist mode.
NOTE: The QuickLoop Fabric Assist mode is not available on Fabric OS 5.x.
cfgCreate Creates a zone configuration.
cfgDelete Deletes a zone configuration.
cfgRemove Removes a zone from a zone configuration.
Zone Management
cfgClear Clears all zone configurations.
cfgDisable Disables a zone configuration.
cfgEnable Enables a zone configuration.
cfgSave Saves zone configurations in flash memory.
cfgTransAbort Aborts the current zoning transaction.
zoneObjectCopy Copies a zone object.
zoneObjectExpunge Expunges a zone object.
zoneObjectRename Renames a zone object.
Table 20 Zoning commands (continued)
Command Description
Table 21 QuickLoop fabric assist mode commands
Command Description
faZoneAdd Adds members to an existing QuickLoop Fabric Assist zone.
faZoneCreate Creates a QuickLoop Fabric Assist zone.
faZoneDelete Deletes an existing QuickLoop Fabric Assist zone.
faZoneRemove Removes members from an existing QuickLoop Fabric Assist zone.
qloopAdd Adds a member to a QuickLoop.
qloopCreate Creates a QuickLoop.
qloopDelete Deletes a QuickLoop.
qloopRemove Removes a member from a QuickLoop.
qloopShow Displays QuickLoop information.