HP StorageWorks Fabric OS 5.X Command Reference Guide (AA-RVHVB-TE, September 2005)

Fabric OS 5.x command reference guide 147
Displays diagnostic command information.
Synopsis
diaghelp [command]
Availability
all users
Description
Use this command to display a short description of diagnostic commands that are available to the user if
command is not specified. The command builds a database of command information during the first
execution. This process takes a few seconds to complete.
NOTE: Use default operands when running diagnostics commands. Nondefault settings require detailed
knowledge of the underlying hardware and are intended for support personnel only. Contact HP customer
support if you wish to use these operands.
Operands
This command has the following operand:
Examples
To display diagnostic command information:
See also
none
diagHelp
command Specify a command name to display more detailed information.
switch:admin> diaghelp
bladepropshow display blade properties
chippropshow display chip properties
chipregshow display contents of port registers
datatypeshow display available diagnostic data types
diagcommandshow display diagnostic command descriptions
diaghelp display diagnostic command descriptions
diagmodeshow display diagnostic mode configuration
diagoktorun check to see if it is ok to run a diagnostic test
diagshow display diagnostics status
diagstatus display currently running diagnostic tests
minispropshow display ASIC pair property
minisregshow display contents of ASIC pair registers.
ptbufshow dump port buffer contents
(output truncated)