HP StorageWorks Fabric OS 5.0.0 Fabric Watch User Guide (AA-RW1TA-TE, May 2005)

75Fabric OS 5.0.0 Fabric Watch user guide
You can specify triggers for any number of alarm states or alarm actions. The first prompt
enables you to select which FRU states trigger events.
To select a group of FRU states:
1. Add the numbers beside each state (for the states you want to include).
2. Enter the total at the prompt
For example, to trigger events using the Absent, Off, and Faulty states, add the assigned
values and enter that value at the prompt. In this case, the values are 1, 8, and 16,
respectively, and the total is 25.
Configuring Fabric Watch using Web Tools
To configure Fabric Watch using Advanced Web Tools, see the HP StorageWorks Fabric OS
4.x advanced web tools user guide
.
Configuring Fabric Watch using SNMP
NOTE: The instructions given in this procedure apply to the AdvantNet MIB browser. The
procedure might vary if you use other MIB browsers.
To configure Fabric Watch using SNMP:
1. Open a MIB browser.