Brocade Web Tools Administrator's Guide (53-1000606-01, October 2007)

Web Tools Administrator’s Guide 229
53-1000606-01
Managing Active Directory service
18
4. Select None, Switch Database when Active Directory authentication failed, or Switch Database
when Active Directory timeout from the Secondary AAA Service drop-down menu.
To disable Active Directory service, select Switch Database from the Primary AAA Service
drop-down menu and select None from the Secondary AAA Service drop-down menu.
5. Click Apply.
Modifying Active Directory service
Use the following procedure to change the parameters of a Active Directory service that is already
configured.
1. Open the Switch Administration window as described on page 29.
2. Click the AAA Service tab.
3. Click a server from the ADLDAP Configuration list.
4. Click Modify.
The RADIUS/ADLDAP Configuration dialog box opens.
5. Type new values for the port, timeout, and domain.
6. Click OK to return to the AAA Service tab and click Apply.
Removing Active Directory service
Use the following procedure to remove a RADIUS server.
1. Open the Switch Administration window as described on page 29.
2. Click the AAA Service tab.
3. Click a server from the ADLDAP Configuration list.
4. Click Remove.
The server is not deleted until you apply the changes from the AAA Services tab.
5. Click Apply in the AAA Services tab.
A confirmation displays, warning you that you are about to remove the selected server.
6. Click Yes in the confirmation.