Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 29
53-1000600-02
AG-1023
2
Probable Cause Indicates that the specified F_Port is failing over to its preferred N_Port.
Recommended
Action
Please run ag --mapshow to display the updated F_Port to N_Port mapping.
Severity INFO
AG-1023
Message <timestamp>, [AG-1023], <sequence-number>,, INFO, <system-name>, F_Port <fport>
mapped to offline N_Port <nport> is failed over to its preferred N_Port <pport>.
Probable Cause Indicates that the specified N_Port has failed to come online. F_Port mapped to this N_Port had its
preferred set and is online.
Recommended
Action
Run the ag --mapshow command to display updated F_Port to N_Port mapping.
Severity INFO
AG-1024
Message <timestamp>, [AG-1024], <sequence-number>,, INFO, <system-name>, F_Port <fport>
is failed back to its preferred N_Port <nport>.
Probable Cause Indicates that the specified N_Port is failing back F_Ports, which are failed over to some other
N_Port.
Recommended
Action
Run the ag --mapshow command to display the updated F_Port to N_Port mapping.
Severity INFO
AG-1025
Message <timestamp>, [AG-1025], <sequence-number>,, ERROR, <system-name>, Port group of
Slave N_Port <port> is different than its Master N_Port <m_port>.
Probable Cause Indicates that port group of Master and Slave N_Ports are different while the Trunk Area assigned
to the attached F_Ports on edge switch is the same.
Recommended
Action
Please run the porttrunkarea --show command on the attached switch to display that the TA is
assigned to all ports in the system and run porttrunkarea --enable to reconfigure the TA.
Severity ERROR