Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

Fabric OS Message Reference 333
53-1000600-02
PDM-1008
54
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
PDM-1008
Message <timestamp>, [PDM-1008], <sequence-number>,, WARNING, <system-name>, Failed to
get the number of U_Ports.
Probable Cause Indicates that the parity data manager (PDM) system call to getCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
PDM-1009
Message <timestamp>, [PDM-1009], <sequence-number>,, WARNING, <system-name>, Can't update
Port Config Data.
Probable Cause Indicates that the parity data manager (PDM) system call to setCfg failed.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING
PDM-1010
Message <timestamp>, [PDM-1010], <sequence-number>,, WARNING, <system-name>, File open
failed: <file name>, errno= <errno>.
Probable Cause Indicates that the parity data manager (PDM) process could not open the specified file.
Recommended
Action
Run the firmwareDownload command to reinstall the firmware.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity WARNING