Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

262 Fabric OS Message Reference
53-1000600-02
FW-1500
30
Severity WARNING
FW-1500
Message <timestamp>, [FW-1500], <sequence-number>,, WARNING, <system-name>, Mail overflow
- Alerts being discarded.
Probable Cause Indicates that mail alert overflow condition has occurred.
Recommended
Action
Resolve or disable the mail alert using the fwMailCfg command.
Severity WARNING
FW-1501
Message <timestamp>, [FW-1501], <sequence-number>,, INFO, <system-name>, Mail overflow
cleared -
<Mails discarded> alerts discarded.
Probable Cause Indicates that the mail overflow condition has cleared.
Recommended
Action
No action is required.
Severity INFO
FW-1510
Message <timestamp>, [FW-1510], <sequence-number>,, INFO, <system-name>, <Area string>
threshold exceeded: Port <Port number> disabled.
Probable Cause Link failures indicates that the specified port is now disabled because the link on this port had
multiple link failures that exceed Fabric Watch threshold on the port. Both physical and hardware
can cause link failures. Link failures frequently occur due to a loss of synchronization. Link failures
also occur due to hardware failures, a defective small form-factor pluggable (SFP) or faulty cable.
Protocol errors indicates CRC sum disparity. Occasionally, these errors occur due to software
glitches. Persistent errors occur due to hardware problems.
Recommended
Action
Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the
port using the portEnable command.
Severity INFO