Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)
Fabric OS Message Reference 247
53-1000600-02
FW-1359
30
FW-1359
Message <timestamp>, [FW-1359], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of authentication failures has changed from a value outside of the
acceptable range to a value within the acceptable range. Authentication failures can occur for
many reasons. The switch on the other side might not support the protocol, have an invalid
certificate, not be signed properly or send unexpected packets. The port where authentication fails
is segmented. This counter keeps track of the number of authentication failures.
Recommended
Action
No action is required.
Severity INFO
FW-1360
Message <timestamp>, [FW-1360], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has changed.
This counter keeps track of the number of unexpected SLAP packets and SLAP packets with faulty
transmission IDs.
Recommended
Action
Responses to security-class messages depend on user policies. Consult your security administrator
for response strategies and policies.
Severity INFO
FW-1361
Message <timestamp>, [FW-1361], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has fallen
below the low boundary. This counter keeps track of the number of unexpected SLAP packets and
SLAP packets with faulty transmission IDs.
Recommended
Action
No action is required.
Severity INFO