Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

216 Fabric OS Message Reference
53-1000600-02
FW-1186
30
FW-1186
Message <timestamp>, [FW-1186], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the percentage of incoming traffic that the port experiences has risen above the high
boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1187
Message <timestamp>, [FW-1187], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the percentage of incoming traffic that the port experiences has changed from a
value outside of the acceptable range to a value within the acceptable range.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1188
Message <timestamp>, [FW-1188], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has changed.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1189
Message <timestamp>, [FW-1189], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the percentage of outgoing traffic that the port experiences has fallen below the low
boundary.