Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

182 Fabric OS Message Reference
53-1000600-02
FSPF-1005
27
FSPF-1005
Message <timestamp>, [FSPF-1005], <sequence-number>,, ERROR, <system-name>, Wrong Section
Id <section number>, should be <section number>, input port = <port number>
Probable Cause Indicates that an incorrect section ID was reported from the specified input port. The section ID is
used to identify a set of switches that share an identical topology database. The section ID is
implemented inside the protocol. The error message itself will indicate the mismatched section ID.
It should be set to 0 for a nonhierarchical fabric. Brocade switches support only section ID 0.
Recommended
Action
Use a frame analyzer to verify that the reported section ID is 0. Any connected (other manufacturer)
switch with a section ID other than 0 is incompatible in a fabric of Brocade switches. Disconnect
the offending switch.
Severity ERROR
FSPF-1006
Message <timestamp>, [FSPF-1006], <sequence-number>,, ERROR, <system-name>, FSPF Version
<FSFP version> not supported, input port = <port number>
Probable Cause Indicates that the FSPF version is not supported on the specified input port.
Recommended
Action
Update the FSPF version by running the firmwareDownload command to update the firmware to the
latest version. All current versions of the Fabric OS support FSPF version 2, which is the correct
version.
Severity ERROR