Manualshelf

User Manual

ManualsBrandsHP ManualsStorageBrocade 4Gb SAN Switch for HP BladeSystem p-Class
31323334353637383940
34 Performing basic configuration tasks
To verify HA features:
HA features provide maximum reliability and nondisruptive replacement of key hardware and software
modules. To verify these features, connect to the switch as admin and use any of the following
commands:
• chassisshow verifies the Field Replaceable Units (FRUs).
• For the Core Switch 2/64 and the SAN Director 2/128:
• hashow verifies that HA is enabled, that the heartbeat is up, and that the HA state is synchronized
between the active and standby CP cards.
• slotshow inventories and displays the current status of each slot in the system.
To verify fabric connectivity:
1. Connect to the switch and log in as admin.
2. Issue the fabricshow command, which displays a summary of all the switches in the fabric.
Example:
To verify device connectivity:
1. Connect to the switch and log in as admin.
2. Optional: Issue the switchshow command to verify that devices, hosts, and storage are connected.
3. Optional: Issue the nsshow command to verify that devices, hosts, and storage have successfully
registered with the Name Server.
4. Issue the nsallshow command, which displays 24-bit Fibre Channel addresses of all devices in the
fabric.
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
1: fffc01 10:00:00:60:69:80:04:5a 192.168.186.61 192.168.68.193 “switch61”
3: fffc03 10:00:00:60:69:10:9c:29 192.168.186.175 0.0.0.0 “switch175”
4: fffc04 10:00:00:60:69:12:14:b7 192.168.174.70 0.0.0.0 “switch70”
5: fffc05 10:00:00:60:69:45:68:04 192.168.144.121 0.0.0.0 “switch121”
6: fffc06 10:00:00:60:69:00:54:ea 192.168.174.79 192.168.68.197 “switch79”
7: fffc07 10:00:00:60:69:80:04:5b 192.168.186.62 192.168.68.194 “switch62”
8: fffc08 10:00:00:60:69:04:11:22 192.168.186.195 0.0.0.0 ”switch195”
9: fffc09 10:00:00:60:69:10:92:04 192.168.189.197 192.168.68.198 “switch197”
10: fffc0a 10:00:00:60:69:50:05:47 192.168.189.181 192.168.68.181 “switch181”
11: fffc0b 10:00:00:60:69:00:54:e9 192.168.174.78 192.168.68.196 “switch78”
15: fffc0f 10:00:00:60:69:30:1e:16 192.168.174.73 0.0.0.0 “switch73”
33: fffc21 10:00:00:60:69:90:02:5e 192.168.144.120 0.0.0.0 “switch120”
44: fffc2c 10:00:00:60:69:c0:06:8d 192.168.144.121 0.0.0.0 “switch121”
97: fffc61 10:00:00:60:69:90:02:ed 192.168.144.123 0.0.0.0 “switch123”
98: fffc62 10:00:00:60:69:90:03:32 192.168.144.122 0.0.0.0 “switch122”
The Fabric has 15 switches
switch:admin>