- Hewlett-Packard Printer User Guide

Appendix B Control Panel Menus 452
Configuration Menu
RAM DISK=AUTO OFF
ON
AUTO
This item determines how the RAM disk is
configured. This item appears only if there is no
optional hard disk installed and the printer has at
least 12 MB of memory.
OFF: The RAM disk is disabled.
ON: The RAM disk is enabled. Configure the amount
of memory to be used through the following item: RAM
DISK SIZE.
Note
If the setting is changed from OFF to ON or from OFF to
AUTO, the printer will automatically reinitialize when it
becomes idle.
RAM DISK
SIZE=xxxK
0K and up
(This value
depends on
the amount of
installed
memory.)
This item determines the size of the RAM disk. This
item appears if RAM DISK=ON or AUTO.
Press - V
ALUE
+ to change settings by increments of
100.
Note
This setting cannot be changed if RAM DISK=AUTO.
Changing this value will cause the printer to
reinitialize when it becomes idle.
Item Values Explanation