- Hewlett-Packard Printer User Manual

Unpacking and Assembly 1-17
32. Remove the front cover, and leave it off until the printer is
powered up and normal operation is verified.
33. Using the threading string supplied, pull the drain tube that
is connected to the right-side spittoon through the stand leg
to the rear of the printer, and connect it to the right-side
excess ink reservoir (see Fig. 1-10 and Fig. 1-11).
Fig. 1-10. Drain tube routing (with front cover removed)
Fig. 1-11. Connect the excess ink sensor cable
Sensor cable
Drain tube