- Printer Owner's Guide

Startup Problems
Startup Problems
Overview
There are many different causes of system startup problems.
Locate the problem you are having in the following sections.
Power Indicator
Light Off
If the power indicator light does not come on when you turn on
your system, see Table 13–4. The indicator light is shown in
Figure 13–1.
Figure 13–1 Power Indicator Light
1
MLO-009416
Table 13–4 Power Indicator Light Failure
Possible Cause Corrective Action
Power cord is not connected. Check the power cord connections at
both ends.
Wall socket is inoperative. Try a different wall socket, or try an
electrical device that you know works
in the wall socket.
Defective power supply. Contact your Digital service
representative.
13–6 Identifying a Problem