- Hewlett-Packard Reference Manual

Columns and Fittings
Fittings
16
Type Description Typical Use Part No.
1/4-inch swage, nut 1/4-inch packed metal columns 5080-8753
stainless steel, front ferrule
pkg, 20 of each back ferrule
1/8-inch swage, nut 1/8-inch packed metal columns 5080-8751
stainless steel, front ferrule
pkg, 20 of each back ferrule
1/4-inch swage, nut 1/4-inch packed metal columns 5080-8752
brass, pkg, front ferrule
20 of each back ferrule
1/8-inch swage, nut 1/8-inch packed metal columns 5080-8750
brass, pkg, front ferrule
20 of each back ferrule
Vespel, 1/4-inch ferrule inlet/detector liners, 5080-8774
pkg of 10 1/4-inch glass packed columns
Vespel, 1/8-inch ferrule metal columns 0100-1107
pkg of 10
graphite, 1.0-mm ferrule capillary columns 5080-8773
pkg of 10
graphite, 0.5-mm ferrule capillary columns 5080-8853
pkg of 10
graphite 6.35-mm O-ring inlet/detector liners, 0905-0767
1/4-inch glass packed columns,
split capillary inlet insert
graphite 6.52-mm O-ring splitless capillary inlet insert (use) 0905-1004
silicone 6.0-mm O-ring inlet/detector liners 0905-0322
1/4-inch glass packed columns,
split/splitless capillary inlet inserts
silicone 1.0 mm O-ring capillary columns 0905-0759
Note: Dimensions given are id’s of the O-ring or ferrule.
Table 1-1. Typical Fittings for Columns and Inlet/Detector Liners, Adapters, and Inserts