User's Manual

Environmental control system 41
4.
Click Connect.
Locating the ECS IP address
IMPORTANT:
The ECS has three NIC addresses: 10.10.10.1, 10.10.10.2, and an IP address
that is set up by the customer for external communication.
The PLC must be connected to locate the IP address for each NIC. For more information, see "Managing the
ECS from the HP POD 240e NA (on page 37)."
To locate the ECS IP address:
1. Select Start>Run.
2. Enter ipconfig.
The IP address appears under adapter #3.
-or-
1. Select Start>Network and Sharing Center.
2. Right-click Local Area Network.
3. Click the Support tab.
The IP address appears.