- Hewlett Packard Corporation Printer Operator's Guide

2.18 Emulation Mode of Operation
The DEClaser 2200 plus operates using DEC PPL3 mode. If you have an
optional emulation cartridge installed, select Emulation Mode to invoke a
protocol from the cartridge.
Use the procedure in Table 2–8 to select Emulation Mode.
Table 2–8: Selecting Emulation Mode
Operation Display Reads
1. Press
On Line
to place the printer
off line.
— The On Line indicator goes off.
00 READY
2. Press and hold
Menu
for about
4 seconds.
MODE = DEC 00
3. Press or to select Emulation
Mode.
MODE ‘‘EMULATION NAME’’ xx
4. Press
Enter
to select and save the
mode.
— The mode is automatically saved
in NVRAM.
00 READY ‘‘EMULATION NAME’’
or
READY
Operating Information 2–51