Instruction Manual

Error
Corrective Action
LUSE volume
A parity group that is administrated in a CLPR
migrated to another CLPR.
The LUSE volume associated to the parity group
administrated in a CLPR is set across multiple CLPRs.
Check the settings, migrate the entire LUSE volume
to the CLPR to which the parity group migrated, if
necessary.
AportinHighS
peed mode
TheportinanS
LPR migrated to another SLPR.
You are trying
to allocate ports in a port block in
High Speed mod
e to multiple SLPRs. Check the ports'
settings, an
d ensure that all ports in the port block
belong to the
same SLPR.
Name of SLPR
The SLPR name cannot be changed.
You cannot assign the same name to multiple SLPRs.
The SLPR name you entered is already used. Enter
another name.
Name of CLPR
TheCLPRnamecannotbechanged.
You cannot assign the same name to multiple CLPRs.
TheCLPRnameyou enteredis already used or
reserved by a system. Enter another name.
Parity Group
The parity group in a CLPR cannot migrate to another
CLPR.
If you cann
ot migrate the parity group in a CLPR to
another CL
PR.
• The specifi
ed parity group is concatenated to
another p
arity group. The parity groups that
construc
t the concatenated parity groups must
belong to thesameCLPR. Specifyall parity groups
that construct the concatenated parity groups.
• If you do not click Apply when creating a new
CLPR, the parity group cannot be allocated. Click
Apply, and migrate the parity group.
NAS port
TheNAS portsinanSLPR migratedto another SLPR.
NAS ports in the same channel adapter must belong
to the same SLPR. Migrate all NAS ports in the same
channel adapter.
SSID
You cannot migrate SSIDs.
You cannot migrate the SSID associated to a CU
group that does not belong to the current CU group.
In this case, migrate the SSID:
1. Use the drop-down list for CU groups in the
upper right of the XP Remote Web Console main
pane to change the CU group to the CU group
the desired SSID is associated to.
2. Delete the SSID you want to migrate.
3. Use the drop-down list for CU groups in the
upper right of the XP Remote Web Console main
pane to switch the CU group to the CU group
the destination SLPR belongs to.
4. Add the SSID.
34
Troubleshooting