Maintenance and Service Guide

Card reader/audio board
Table 5-6 Card reader/audio board description and part number
Description Spare part number
Card reader/audio board
NOTE: The card reader/audio board spare part kit does not include the cable. The cable is available as
spare part number L63584-001.
L63583-001
Before removing the card reader/audio board, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the bottom cover (see Bottom cover on page 26).
3. Remove the battery (see Battery on page 28).
Remove the card reader/audio board:
1. Disconnect the cable from the ZIF connector on the card reader/audio board (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the card reader/audio board.
34 Chapter 5 Removal and replacement procedures for authorized service provider parts