user manual

Pulse On/OffScalar
Programming Codes
SCPI:
PULSe:SOURce INTernal
PULSe[:STATe] ON]OFF]l]O
Analyzer: NONE
See Also
IALC),m, Pulse Menu
Pulse On/Off
Scalar
Function Group
Menu Map
Description
Programming Codes
See Also
(MOD)
4
This softkey activates pulse modulation mode, and sets the internal
pulse generator to produce 27.778 kHz square wave pulses
(18 ps pulse width, 36 ps pulse period). The rise and fall times of
the RF envelope are approximately 2 /.Ls. These pulses allow proper
operation with HP scalar network analyzers in ac detection mode.
An asterisk next to the key label indicates that this feature is active.
SCPI:
PULSe:SOURce SCALar
PULSe[:STATe] ON]OFF]l]O
Analyzer: SHPM function on, PM0 function off.
IALC),m, Pulse Menu
“INSTALLATION,” Chapter 3.
HP 8360
User’s Handbook
Operating and Programming Reference P-19