user manual

H
HP-IB Address
To set the synthesizer’s HP-IB address, refer to “Address” in this
manual.
HP-IB Menu
Function Group
SYSTEM
Menu Map
8
Description
This softkey reveals the softkeys in the HP-IB control menu.
HP 8360
User’s Handbook
Adrs Menu
Reveals the softkeys that
allow HP-IB addresses to be
changed.
Programming Language
Analyzr
Sets analyzer as the external
interface language.
Progranrming Language CIIL
Sets CIIL as the external
interface language.
Programming Language SCPI
Sets SCPI as the external
interface language.
Three different programming languages are available:
n SCPI, Standard Commands for Programmable Instruments,
is the instrument control programming language developed by
Hewlett-Packard to conform to the IEEE 488.2 standard (replacing
IEEE 728-1982). The IEEE 488.2 standard provides codes,
formats, protocols, and common commands that were unavailable
in the previous standard.
n Analyzer is the programming language compatible with the
HP
8340/41 synthesized sweepers system language and many
network analyzers.
n CIIL, Control Interface Intermediate Language, is the instrument
control programming language used in option 700 synthesizers.
Option 700 synthesizers are M.A.T.E. (Modular Automatic Test
Equipment) compatible.
Operating and Programming Reference H-l