Instructions / Assembly

Table Of Contents

Do not stand the mirror upright on hard

surfaces while ﬁtting as this will damage the edge.

Keep the plastic corner protectors on

until installation is fully completed.

The mirror can be Horizontally Mounted

or Vertically Mounted.

To avoid the risk of electrocution,

please turn OFF the electricity supply mains

before commencing the installation.

PAGE 1
To avoid the risk of electrocution, please turn OFF the electricity supply mains before commencing the installation. Do not stand the mirror upright on hard surfaces while ﬁtting as this will damage the edge. Keep the plastic corner protectors on until installation is fully completed. The mirror can be Horizontally Mounted or Vertically Mounted.
PAGE 2
(1)You would see 2 wires, Live wire with letters, Neutral wire without letters. (2)Safely connect the 2 wires to the wires of your wall switch in your home. The mirror comes with a 4 ft power cable that can be directly plugged into the switch for convenient use. It can also be hardwired by cutting off the plug and control the ON/OFF of power via the wall switch. Removing the plug connector will invalidate your product warranty.