Assembly Instructions

ASSEMBLY INSTRUCTION
Item#: 5414-90017 Two-Drawer Bachelors Chest
** Please make sure you have all parts indicated below prior to assembly.
This Chest is heavy and can best be assembled with the help of two or more persons.
Assembly Steps for Bachelors Chest legs :
1. Place Chest top upside down on a soft surface to prevent it from being scratched.
2. Attach one leg (E) to bottom rail by using 2 bolts (B), 2 lock washers (C), 2 flat washers (D),
and secure by turning with Allen Wrench (A) in a clockwise direction. Please follow the number
on leg and corner block (See diagram 1).
3. Attach the other three legs in the same way as step 2.
4. Turn the Bachelors Chest upright.
Caution: Do not over tighten.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water
solution. Polish the finish with soft cloth and an industry recognized furniture polish.
DIAGRAM 1
E