Installation Guide

2 / 27 HONG KONG KONING INDUSTRIAL LIMITED
Tel:[phone]
E-mail:[e-mail]
W1000 INSTALLATION GUIDE
1. Signal Booster Improves Cellular Signals
In our real life, we practice to install signal booster to eliminate the problems that UE can’t receive signal from
cell tower as construction material or other blocks.
As figure show: we install one donor antenna at a location outside of the home or building where the strongest
cell signal is present. The donor antenna receives and sends that weak signal via coax cable to a signal
booster located indoors. That weak signal is amplified by the booster and delivered via coax cable to an
inside antenna which rebroadcasts the amplified signal within one or several areas where UE get improved
signal. Signals from indoor cell devices are likewise picked up by the inside antennas, amplified by the signal
booster and transmitted back to the cell tower via the outside antenna.
In fact, signal booster establishes the communication between UE and cell tower by amplify, relay weak signal
which blocked in construct from UE and cell tower