Technical Manual

XNX Universal Transmitter
Section 1 - Introduction
25
Test Mode
Inhibit
Enable/Disable Inhibit
Force mA Output
Select Current: 0 to 22 mA
Accept
Force Relay
7
Select Relay 1
Select Relay 2
Select Relay 3
Accept
Alarm/Fault Simulation
Alarm 1 Simulation
Alarm 2 Simulation
Warning Simulation
Fault Simulation
7 Optional relay only
Calibration Mode
Gas Calibration
Enter Span Gas Concentration (Oxygen)
Enter Span Gas Concentration (Not Oxygen)
Bump Test
mA Output Calibration
Adjust 4 mA Output
Adjust 20 mA Output
Soft Reset
8
Align Excel
9
8 Searchpoint Optima and Searchline Excel only
9 Searchline Excel only