VERISHIELD - VS 321 User instructions Hearing Protection Headset VS321 ® BC User instructions EN Mode d’emploi FR Instrucciones de uso ES
VERISHIELD - VS 321 (A) BATTERY REPLACEMENT AND CHARGING BATTERY STATUS Battery level LED [C8] colour 100-10% GREEN 10-0% *A4 RED *A5 BATTERY CHARGING WITH USB CABLE LED [C4] Status RED (blinking) GREEN Charging in progress Charged, ready to use (B) WEARING INSTRUCTIONS 1
(C) OPERATING THE HEADSET - HEADSET CONTROLS (D) TEST RESULTS AND TECHNICAL DATA TESTED ACCORDING TO ANSI S3.
EN User instructions PRODUCT DESCRIPTION: Hearing Protection Headset PRODUCT NUMBER: The VeriShield VS 321 headset is an over-the-ear hearing protector with built-in personal sound exposure monitoring. The headset combines a high level of noise reduction with sound amplification to allow workers to be aware of their surroundings, hear warning signals and alerts while still being protected.
IMPORTANT USER INFORMATION 1 The earmuffs should be fitted, adjusted and maintained in accordance with the instructions. 2 The earmuffs should be worn at all times in noisy surroundings 3 The earmuffs should be regularly inspected for serviceability. 4 The earmuffs can be cleaned with soap and warm water. They should not be dipped into water. 5 Earmuffs and, in particular, cushions may deteriorate with use and should be examined at frequent intervals for cracking and leakage.
EN User instructions FIT TEST Perform Fit test Double press *C2 Repeated audio tone Fit test result: Good fit Positive audio tone Fit test result: Poor fit Negative audio tone CALIBRATION Calibration in progress Calibration Complete *C3 Blinking Green *C3 Solid Green MAINTENANCE Factory reset Recovery mode PAIR WITH BLUETOOTH DEVICE The headset is in Bluetooth pairing mode when powered on. Enable Bluetooth on your mobile device and ensure that the mobile device is within 10m of the headset.
ATTENUATION DATA Verishield is tested and approved in accordance with ANSI S3.19-1974 Standard at Michael & Associates Inc., USA. Verishield Attenuation Data according to American National Standards Institute Specifications ANSI S3.19-1974 (in passive mode, electronics switched off) The level of noise entering a person’s ear, when hearing protection is worn as directed, is closely approximated by the difference between the A-weighted environmental level and the NRR.
EN WARRANTY: This product is covered by a one year warranty against defects in material and workmanship. The warranty does not cover included batteries and damage caused by misuse, abuse or unauthorized modifications. Any attempt to modify or disassemble the product will void the warranty. EN DISCLAIMER: If the recommendations and directions mentioned in this user manual are not followed, the protection and function afforded by the earmuffs may be severely impaired.
EN The use of the WEEE Symbol indicates that this product may not be treated as Household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about The recycling of this product, please contact your local authority, your household/industrial waste disposal service provider or the shop where you purchased the product.
MANUFACTURER Honeywell Safety Products USA, Inc. 7828 Waterville Road, San Diego, CA92154 (800)430-5490 www.honeywellsafety.com SUPPORT & CONTACT UNITED STATES 7828 Waterville Road San Diego, CA 92154 USA T 1 800 430 5490 Document number: 23426-4040-181009 © All rights reserved.
